pátek 28. prosince 2018

Foamglas

The multifunctional lightweight aggregate made of foam glass. The insulation elements consist of cellular glass with a closed cell structure. Perinsul has an exceptionally high unit compressive strength of 2. This product is tested to BS EN772-1. It is a light weight, rigid and durable insulation, composed of millions of completely sealed glass cells.


In-keeping with the principles on which the project was designe he settled on a specialist local stockist: Passivhaus Store (PH Store) in Devon.

The advice and service offered by both FOAMGLAS. It is made of cullet, foaming agent, modified additive and foaming accelerator. After fine pulverization and uniform mixing, it is melted at high temperature, foamed and annealed. Each product clause is authored in NBS format and is intended for inclusion in project specifications. It provides a unique combination of properties that offer an alternative to other types of building insulation.


However, you can download technical file, specifications file in the section below. Hint: products with have technical specifications. Searching for FOAMGLAS products?


See the Technical Data Sheet.

Recommended grain sizes here. Anglitemp manufactures and supplies a range of coatings, coverings and mastics suitable for Thermal Insulation applications. We offer a full range of pipe support products for cryogenic to high temperature applications.


Under the “Insulite” brand Anglitemp is the UK market leader in the manufacture and. Exterior insulation, rendered. Foamglas from EH Smith Sustainable Products. View our full range of Sustainable Walling Materials available for a quote online today. The boards are square edged and contain post.


Foam glass, lightweight, opaque glass material having a closed-cell structure. It is made in molds that are packed with crushed or granulated glass mixed with a chemical agent such as carbon or limestone. For large diameter piping where half sections are not practical, curved sidewall segments are preferred. See Table for fabrication guidelines. It is a high performance, reliable, durable and environmentally-friendly insulation material that is suitable for the entire building envelope.


Official Journal of the European Communities No. This feature is not available right now. Packages must be handled with care and protected from the elements while in storage.


Please try again later. A dimensionally stable material with a high compressive strength, it is noncombustible, waterproof, impervious to water vapor, pest resistant, and acid resistant.

Pittsburgh Corning is made exclusively of glass, there is no binder or other material in its composition. FOAMGLAS Perinsul HL (High Load) FOAMGLAS Perinsul HL has a very high density. It is used to eliminate thermal bridging.


The upper surface is green and coated in Bitumen, the same as the lower surface. It is also laminated with a glass reinforced fleece which is compatible with Mortar. Cellular Glass - Insulating the Whole Building This seminar provides an understanding how cellular glass insulation is manufacture the features and be. Its unique combination of high compressive strength and low thermal conductivity makes it ideal for a wide. Formglas columns, domes, ceilings, moldings in Glass Fiber Reinforced Gypsum (GFRG), GFRC, FRP, QuarryCast and MetalCast.


Elément de base entre sol et mur, pour éviter des ponts thermiques et les remontées d’humidité par capillarité (pose sur lit de mortier). If you need to arrange courier, I can help with this.

Žádné komentáře:

Okomentovat

Poznámka: Komentáře mohou přidávat pouze členové tohoto blogu.

Oblíbené příspěvky